Stainless Steel N<sub>2</sub> Heater

Stainless Steel N2 Heater

PRODUCT OVERVIEW

For high purity wafer drying and parts cleaning, the Heateflex Stainless Steel N2 Heater is suitable for nitrogen, CDA (Clean Dry Air) or other high purity, inert gases. Constructed with an electropolished 316L stainless steel housing, the housing’s passivated wetted surfaces ensures compatibility with most process fluids. Additional features include a compact design for reduced footprint and a replaceable heater element. It is also available in a variety of models ranging from 375 watts to 3,000 watts.

PATENTED SANITARY DESIGN REDUCES PARTICLE ENTRAPMENT

The patented heating module on this gas heater features a tri-clamp sanitary fitting that eliminates threads; reducing particle entrapment and areas for potential bacterial growth. Compare this elegant approach to typical stainless steel heaters where screw plugs, threads, bulky flanges, and bolts can trap particles. In contrast, the Heateflex N2 heater provides a true sanitary design.

SAFETY FEATURES

There are a number of safety features incorporated into the stainless N2 heater. For example, the heater features high limit and process thermocouples to regulate and maintain temperature. Furthermore, there is also a thermal cut-off sensor to prevent overheating, and an electrical ground wire. Finally, there is an additional option for the heater to feature a microprocessor-based temperature controller in a NEMA-rated external switching chassis.

SPECIFICATIONS

The stainless N2 heater comes in various sizes, ranging from 375 to 3,000 watts (dependent on customer voltage) and from 120 VAC to 240 VAC, 1-phase (dependent on wattage).  Several units may also be used in-series for higher wattage and flow capacities. Ambient temperature is 200ºC (392º F), with a pressure of 60 PSIG at 200º C.

iconPowericonPower
BrochureContact Us

Benefits

  • High-Purity Design
    • 316L Stainless Steel Electropolished Wetted Surfaces are Polished and Passivated
  • Patented Design
    • Patented Tri-Clover Sanitary Fitting Eliminates Threads to Reduce Particle Entrapment and Potential Bacteria Growth
  • Compact Design
    • Heater is Approximately 13″ Tall
  • Easy Installation
    • Plug and Connect
  • Flexible Solutions
    • Offering a Variety of Power Requirements, Models, and Options
  • No N2 Purge Required

Features

  • Heater: 316L Stainless Steel Electropolish
  • Wetted Surface: 316L Stainless Steel Electropolish
  • Sizes: 375 – 3000 Watts (Dependent on Customer Voltage)
  • Voltages: 120 VAC to 240 VAC 1-Phase (Dependent on Wattage)
  • Temperature: 392°F (200°C)
  • Pressure: 60PSIG @ 200°C

Safety Features:

  • Hi-Limit Thermocouple
  • Process Thermocouple
  • Thermal Cut-Off Sensor
  • Electric Ground Wire

Models

ModelWattsVolts
SGH1-375375120
SGH1-500500120
SGH1-750750120
SGH1-15001500240
SGH1-20002000240
SGH1-30003000240

Controls

Microprocessor Based Temperature Controller in NEMA Rated External Switching Chassis

Options

  • Enclosure for Heater
  • Tri-Clover Fittings Input/Output (Various Sizes Available)
  • Heater Design to be Upside Down for System Drainage
  • Additional Safeties Available
  • Dry Contact on Controls
  • Certifications for Vessel

Contact Heateflex at (626) 599-8566 to learn more about other options.