The Quartz High Purity In-Line Fluid Heater meets the stringent heating standards required for semiconductor manufacturing. This heater uses GE Quartz 214 wetted surfaces to ensure high purity and chemical compatibility with most process fluids. The heating elements mount directly on the quartz surface, providing an effective heat transfer via conduction. With no lamps to replace and no cooling air required, the cost of ownership for this heater is low. Furthermore, this heater mounts either vertically or horizontally, which allows for flexibility in integrating with existing equipment.
DESIGNED FOR EFFICIENCY
In order to limit heat loss while reducing temperature on the surface, this heater features an insulation layer between the vessel and the PVDF housing. In addition, a power modulator further regulates the heater’s temperature for consistent operation.
NUMEROUS SAFETY FEATURES
The Heateflex Quartz In-Line Fluid heater incorporates several important safety features. For example, redundant safety sensors provide temperature control and leak detection. Also, thermal snap switches for both the heater and the housing ensure safe heater operation within the prescribed range. A ground wire also provides protection for both the heater and the operator.
Standard output for this heater is 6.0 kW at 180º C, 208 VAC, 1 and 3-phase. Other kW outputs are available. Maximum operating pressure is 30 psi.
|Tech Tools||Contact Us|