PFA Immersion Tank Heaters

PFA Immersion Tank Heaters

Applications

PRODUCT OVERVIEW

Heateflex Corporation’s immersion tank heaters are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They provide a maximum process work area, and consume a minimal amount of chemicals. Moreover, wetted surfaces feature all-PFA materials, and may be used in tanks made of PVDF, PFA, or quartz. Please contact Heateflex with inquiries about other tank materials.

BOTH AGGRESSIVE CHEMISTRIES AND DEIONIZED WATER

These rugged and durable heaters come in grid, frame, and fence models, with outputs of 1.0 to 30.0 kW. Most importantly, they feature a low watt density (≤ 4 watts/in²) for a fast heating response. Furthermore, these heaters integrate easily into most process tanks. Provide Heateflex with your specifications and tank size, and let us build an immersion heater for you.

SAFETY FEATURES

At the heart of these immersion heaters is the patented Heateflex® heating coil, with a efficiency of > 99% and a MTBF of more than 10 years. Moreover, a microprocessor-based temperature controller regulates the heater output. Additionally, optional safety features include both platinum and embedded ground wires, a Type-J process thermocouple, and RTD over-temperature and process thermocouples.

KEY SPECIFICATIONS

Maximum heating temperature of these immersion heaters is 200º C (392º F), with a temperature accuracy of ± 0.1º C (contingent on customer’s facilitation). Grid heaters are typically ¾” high, and frame heaters 1 ½” high. Outputs range from 1.0 to 30.0 kW (dependent on customer voltage), and from 120 VAC to 480 VAC, 1 or 3-ph (dependent on wattage).

iconBrochureHeataflex_icons_TechtoolsiconPower
BrochureTech ToolsContact Us

Benefits

  • Ultra-Pure Design
    • PVDF/PFA Wetted Surfaces
  • Reliable Heating
    • Heats harsh chemicals
    • Max 200C Heating capability
    • Fully Tested
  • Fast Response
    • Low Watt Density; ≤ 4 watts/in²
  • Compact Design
    • Max power in smallest footprint
    • Grid Heaters – 3/4″ Height
    • Frame Heaters – 1-1/2″ Height
  • Flexible Solutions
    • Heaters designed to be easily integrated into most process tanks. Our customers provide us with their specifications and tank size and we can build a heater for them.
  • No N2 Purge Required

Features

  • Heater: Patented Heateflex® Coil
  • Wetted Surface: All PFA
  • Sizes: 1.0kW to 30kW (Dependent on Customer Voltage)
  • Voltages: 120VAC to 480VAC 1 or 3ph (Dependent on Wattage)
  • Temperature: 200°C (392°F)
  • Temperature Accuracy: ±0.1°C (Contingent on Customer’s Facilitation)
  • Efficiency: >99%
  • MTBF: >10.29 years

Models

ModelkWStandard HeightBenefits
Grid1-6 kW*3/4″Low Profile Design
Frame1-30 kW1-1/2″Low Profile Design for Higher kW’s
Fence1-10 kWVariableHeater on side of tank leaving center of tank open
*Higher kW available depending on size.
Other models available on request depending on kW, voltages, and dimensions.

Controls

Microprocessor Based Temperature Control

Options

  • Platinum Ground Wire
  • Embedded Ground Wire
  • Type J Process Thermocouple
  • RTD Over Temp and Process Thermocouple
  • Perforated Top and Bottom Floor Grid
  • Raised Legs
  • Thermal Fuses
  • Special Cut Grids
  • Air 200 and 300 Controller