HC In-Line Fluid Heater/Static Mixer

HC In-Line Fluid Heater/Static Mixer

The recently-introduced HC In-Line Fluid Heater/Static Mixer from Heateflex combines “no-moving-parts” fluids mixing and heating capabilities in one compact unit. Up to three different fluids at three different flow rates circulate through internal baffles and the heating element inside the Heater/Mixer, resulting in a uniformly-mixed, heated output fluid. The baffles and heating element combine to provide an ideal fluid heating and mixing solution for small space configurations.

Zero O-rings or seals in the Heater/Mixer ensure that there’s only PFA contact for wetted surfaces, eliminating the likelihood of particulate contamination. The fluids input manifold rotates 360 degrees for ease of installation.

Available in output wattages of 2 to 10 kW, and from 120 to 480 volts.


  • Static mixer with no moving parts
  • Input manifold rotates 360° for ease of installation
  • Special internal fittings isolate threads from process fluid
  • Zero O-rings or seals assures only PFA contact for wetted surfaces
  • Meets all relative UL 499, SEMI S2, & SEMI S3 standards
  • Junction box designed to isolate heater and sensor lead wires from atmosphere
  • Improved sensor reading accuracy with redesigned liquid level bracket
  • Most compact design


  • Liquid-level sensor and unique bracket
  • Process Thermocouple
  • Hi-Limit Thermocouple
  • Thermal fuse
  • Platinum-tipped ground wire
  • Separate convoluted tubes for lead wires and sensor leads
  • Optional temperature controller
  • Optional embedded ground wire


  • PFA heater housing
  • PFA-jacketed heater element
  • 3 input manifolds: ¾”, ½”, ¼” Flare inputs
  • ¾” Flare connector output on manifold
  • Process Fluid In/Out: ¾” Flare (other fittings available)
  • Drain: ½” Flare
  • Max Temperature: 180°C
  • Pressure Rating: 60 psi @ 120°C
  • Watts: Sizes ranging from 2-10 kW
  • Heater Voltage: Most voltages available
  • Mounting brackets