Electra DI Water Heating Systems
If space is a concern, the Electra® DI Water Heating System provides maximum power in a minimal footprint. They are easy to install with a wall mountable heater box and control box to reduce the footprint in clean rooms. Electra heaters can be placed near the process, with the controls located in any convenient location. The Electra® gives flexibility of design with uncompromised power and purity.
- Benefits
- Features
- Specifications
Benefits
The Electra deionized water heating system is designed for those needs where space is a premium. Mount it by your process tool or anywhere in your clean room. It handles low to moderate flows, and its easy to install and use. it is yet another example of strength in technology- flexibility and design
- Compact and Easy to Install
- Reduces Thermal Shock and Drying time
- Cleaner Processed Parts with Hot Deionized Water
- Hot Deionizer Water On-Demand, Where You Need It
- Remote Control Operation
Features
- Point-of-Use, One Pass, Ultra-Pure Deionized Water Heating.
- Fully Integrated Microprocessor Control and Safety System.
- Dual-Digital Readout for All Internal and Output Functions.
- Low Voltage (24 VAC), Operator Safe Control Panel.
- PVDF and PFA Wetted Surfaces on Hot Deionized Water Side - (All PFA Available).
- 10' Umbilical Between Heater Box and Control Box.
- Flow Range of 0.5 GPM to 7.5 GPM
- Models from 15kW to 36kW.
- All Chemraz® O-Rings.
Safety Interlocks to Heater Power
- Over-Temperature Safety Interlock On Each Heater.
- PID Temperature Control Safety Interlock.
- Liquid Level Safety Interlock.
- Minimum Flow Safety Interlock.
- Process High Limit Safety Interlock.
- Sensor Failure/Disconnect Safety Interlock.
- Emergency-Off Button Safety Interlock.
Standard Voltages: (200 – 480 VAC, 3 Phase)
Model No |
kW |
Heater Box Dimensions |
Controller Box Dimensions |
KDI915 |
15 |
26" x 24" x 7" |
27" x 20" x 12" |
KDI921 |
21 |
26" x 24" x 7" |
27" x 20" x 12" |
KDI927 |
27 |
36" x 24" x 7" |
27" x 20" x 12" |
KDI930 |
30 |
36" x 24" x 7" |
27" x 20" x 12" |
KDI936 |
36 |
36" x 24" x 7" |
27" x 20" x 12" |
- Resistivity Sensor, Ground Fault Circuit Interrupt, 50' Umbilical Between Heater Box and Control Box
Social Bookmarks
